sony laptop service in Hyderabad

This Post is Explained  we have just a: *motherboard *CPU and  acer laptop repair in hyderabad   no RAM right now we have the hard drive here if it doesn't work I'm gonna take it out and we'll see... if it works so not battery... turn it off okay and this is the..  acer laptop service in Hyderabad the power adapter I bought, which I know its working. I plug it in open the computer..the lid okay its plugged in.. Ho!!! guess what? I'm getting a light in there and that light indicates it is connected to the power. so at this point I'm thinking.. okay.. shure if I'm getting an  toshiba laptop repair in hyderabad LED to turn on and it says it is connected, its getting power maybe unplugging it, and connecting it back in and taking out the memory did something so let's try it, See if it turns on maybe it was just the memory nothing no response at all okay so it's not the power adapter,  sony laptop service in Hyderabad   not the memory not the power jac...

This post is  Explained  okay so my neighbor brought  acer laptop repair  this computer she said it wasn't turning on and had something to do with the power the first thing I try to do well check it and its connected right now it's connected to the outlet no lights here to indicate power so I press the power button nothing happens not even  acer laptop service   the lights come on so my first thought was either the power jack or the power adapter was messed up so I went and got another adapter from ebay because  best laptop repair   I didn't had any other one to test with so here unplug that plug the other one which is already plugged into the to the outlet no lights either, nothing... I press it, nothing happens okay so then...  sony laptop service   if it is not the power adapter itsgonna be the power Jack so now I turn it over it's already pre... lets see.. hard to do this with one hand... okay so I take out first the battery maybe ...

This Post is Explained  it around until the solder  acer laptop repair in hyderabad  kind of equalizes with drags hull during basically you're relying on the surface tension of the solder to do the work for you and so you don't need to worry too much about how much solder you're going to put down on each pin it the pocket a solder makes  acer laptop service in Hyderabad   a little rolling ball over the pin so only a certain amount can get out at a time and that's why you don't end up with a bunch of bridges especially depending on how much you put into there you can't really fill this up too much and you can but it's not  sony laptop service in Hyderabad  a big deal then I switch over to my chisel tip so I can put a lot of heat into these pads here and we'll just kind of a missed shot there just heat them up and let the heat do the work you don't want to press hard with this kind of stuff and you don't    Dell laptop service in Hyderabad ...

This Post is Explained much solder on  acer laptop repair  there but if it didn't you could spread it around the other pins but that's too much so what we'll do is we'll take our solder wick we'll put it down and we'll just simply wick it  best laptop repair away and spread it to the side once it's gone you can then drag  acer laptop service   whatever excess is around and as you can see it just flowed right back up into the place there so that's how you get rid of bridge there's still  sony laptop service  a little bit on there I'll clean my iron okay just a little bit of flux on there just a little bit don't don't need much at all I'm just using a standard chisel tip here and we'll just drag it throughout all the pads there and there's no bridge anymore remember I'll tin it clean it and put it back on the stand that's how you take care of your tips always every time  Dell laptop service   so now you can maybe se...